聚铝性能 编辑
a、净化后的水质优于硫酸铝絮凝剂,净水成本与之相比低15-30%。
b、絮凝体形成快、沉降速度快,比硫酸铝等传统产品处理能力大。
c、消耗水中碱度低于各种无机絮凝剂,因而可不投或少投碱剂。
d、适应的源水PH5.0-9.0范围均可凝聚。
e、腐蚀性小,操作条件好。
f、溶解性优于硫酸铝。
g、处理水中盐分增加少,有利于离子交换处理和高纯制水。
h、对源水温度的适应性优于硫酸铝等无机絮凝剂。
Polyaluminium Chloride
Application method:
1)The liquid product can be used directly or used after dilution.
Dilution is necessary before used for the solid product. The normal dilution ratio for the solid product is 5%-15%.
2)he specific dosage is based on the flocculation tests and trials by the users. The usual dosage of the liquid product is 3-40 g/ton, and of the solid product, 1-15 g/ton
聚合氯化铝
应用方法:
1)液体产品可在稀释后直接使用或使用。
在使用固体产品之前,稀释是必要的。固体产品的正常稀释率为5%-15%。
2)他的具体剂量是基于絮凝试验和用户试验。液体产品的一般用量为3-40克/吨,固体产品1-15克/吨